Touchless Pro 1 – Acidic, Step #1, Touchless Wash for Commercial Vehicles
Touchless pro 1 is a professional-grade low pH(acidic) soap built for vehicle washing in demanding commercial and industrial environments. Designed as a step #1 touchless wash solution, it helps break down stubborn road film, oxidation, and buildup on fleet trucks, trailers, and other work vehicles without the need for brushing. It’s ideal for wash bays, fleet operations, and maintenance facilities that need fast, effective cleaning power from a concentrated chemical system.
Built for Heavy Road Film and Buildup
- Targets mineral-based road film and oxidation on vehicle exteriors.
- Engineered for use on commercial vehicles, fleet equipment, and work trucks.
- Formulated as an acidic specifically for touchless 2-step vehicle washing systems.
- Works in professional touchless, high-pressure, and foam application setups.
- Concentrated chemistry for powerful cleaning when properly diluted and applied.
Touchless Pro 1 is built for real-world fleet abuse, not light dust.
This acidic detergent is suitable for vehicles that see constant highway exposure, harsh weather, and heavy grime, helping remove contamination that typical pH neutral soaps struggle with. When used correctly within a professional wash process, it supports fast turnaround times for trucks, trailers, buses, and other equipment that can’t be down for long.
Professional-Strength Cleaning Power
Our Touchless Pro 1 formula uses phosphoric acid combined with high-performing surfactants and solvents to attack tough soils on exterior vehicle surfaces. The low pH range of 1.0–2.0 reflects an aggressive cleaning character suitable for controlled, professional use on compatible materials. It is intended for operators who understand acidic detergents and want consistent performance in a repeatable wash process.
Simple Integration into Professional Wash Systems
Touchless Pro 1 is designed to fit into existing professional wash workflows where acidic detergents are required as part of the process. It can be used with metering equipment, high-pressure spray, and foaming systems that allow for controlled application and thorough rinsing. When integrated correctly, it helps reduce manual scrubbing while delivering dependable, repeatable results in busy wash operations.
Backed by Image Wash Products
Manufactured by Image Wash Products in Hudsonville, Michigan, Touchless Pro 1 is supported by detailed safety documentation and professional-grade quality control. It’s backed by a company focused on high-performance truck and vehicle wash chemistry for operators who clean vehicles that actually work for a living.
Directions & Safety Overview
Touchless Pro 1 must always be used according to label directions and safety guidelines. Apply only in well-ventilated areas, using appropriate protective equipment such as gloves, protective clothing, eye protection, and face protection to avoid contact with skin and eyes. Do not breathe mist, vapor, or spray, and never use on surfaces or materials that are incompatible with acidic products. Always follow all mixing, application, and rinse instructions on the product label to ensure safe use across vehicle surfaces.
Touchless Pro 1 at a glance
| Chemistry | Low pH (acidic) Step 1 concentrate, pH 1.0–2.0 (phosphoric acid) |
|---|---|
| Pair with | Total Brite 2 (high pH Step 2) |
| Polish-safe | Yes, at the recommended dilution |
| Soap injector setup | Pre-mix 40% Touchless Pro 1 / 60% water (1 part to 1.5 parts water) |
| Final strength at the injector | 52:1 |
| Shipping class | Ships as a DOT-regulated corrosive (UN 3264, Class 8) per SDS Section 14. |
| Safety Data Sheet | Download the Touchless Pro 1 SDS (PDF) |
Injector setup and strength come from our Soap System Calculator. Enter your pressure washer's PSI and GPM there to get the right metering tip.
Use it on
- Fleet trucks, tractors, trailers, buses and work vehicles with heavy, mineral-based road film
- Touchless washing through soap injectors, foam lances and pressure washers
- Polished aluminum and chrome when used as directed, never allowed to dry, and rinsed thoroughly
Keep it off / avoid
- Using it alone. Always follow with a high-pH Step 2.
- Letting it dry on any surface
Touchless Pro 1 FAQs
What do I pair Touchless Pro 1 with?
Total Brite 2. Apply Touchless Pro 1 first, then foam Total Brite 2 directly over it before Step 1 dries, and finish with a high-pressure rinse.
How do I run Touchless Pro 1 through a soap injector?
Pre-mix 40% Touchless Pro 1 with 60% water in a separate container and drop your draw tube in. Use our Soap System Calculator to find the right metering tip for your pressure washer.
Is Touchless Pro 1 safe on polished aluminum?
Yes. It is rated polish-safe at the recommended dilution when it is not allowed to dry and is rinsed thoroughly.
What is the difference between Touchless Pro 1 and Touchless Pro 100?
Touchless Pro 100 is Touchless Pro 1 pre-diluted to the same 40% working strength, so it draws straight from the drum with no pre-mix.
How drum & tote freight works
- Ships by LTL truck freight from Michigan. 55 gallon drums and 275 gallon totes go out on a freight truck, not by parcel.
- Get a live estimate on this page. In the freight estimator, choose a commercial address with a dock or forklift, a residential address or no dock (liftgate needed), or pickup at your local freight terminal. Then enter your ZIP code and state.
- Your estimate is saved with your order. When you add to cart, the quote is added to your order notes. Estimates aren’t final, and final freight charges may vary.
- Hazmat status: Ships as a DOT-regulated corrosive (UN 3264, Class 8) per SDS Section 14.
- Order the right chemistry the first time. We don’t reimburse shipping costs on 5 gallon quantities and larger. If you’re not sure what fits your operation, call us at 616.777.7175 before you order.
- Outside the lower 48 states? Call us for a freight quote.
