icon Skip to content

Foam Cannon + Trigger Combo (2 options available)

Regular price $125.99

Shipping calculated at checkout

Style

Low stock

Specifications

Image Foam Cannon:
Capacity: 40 fl oz
Minimum tested 1.7GPM @ Over 1000PSI
Maximum Supported: 5GPM @ 3000 PSI

MTM Hydro Foam Cannon:
- Min. 1,100 psi - Max. 5,000 psi
- Min. 1.4 gpm - Max. 5.3 gpm
- Max. 140°F

 We here at Image Wash Products know that time is valuable and limited so we constructed these pre-built kits that will allow you to get right to washing. These are built to order and come with everything you need to get going. Premium parts from the likes of Suttner, MTM Hydro, and General Pump are all used in the construction of this bundle. We apply thread tape to all hardware to ensure a perfect seal. Make sure you read below and make sure you have what you need to connect the unit to your pressure washer hose.

IMPORTANT READ THIS:

Depending on your connection type on the end of your pressure washer hose you will either need a 3/8 male socket or 3/8" male plug quick connect or you will need to 'hard pipe' the gun to your hose. Quick connect fittings can be found at your local hardware store. 

Options

Option 1: Wide Based foam cannon + Suttner ST-1500 trigger (Handles a lower amount of pressure) Max 3000 PSI. 

Option 2: MTM Hydro foam cannon + Suttner ST-1500 trigger(Handles higher pressure) Max 5000 PSI. 


What's Included

  • Trigger - Suttner-1500. The picture in the product description is for illustrative purposes only. 
  • 1/4" Quick Disconnect Socket (Male) 
  • Foam Cannon  (comes with only ONE of the following based on variant selection)

 

Foam Cannon Trigger Combo - Corvette


Just Need The Foam Cannon?

Find them here:

MTM Hydro PF22.2 - Max PSI 5000

Foam Cannon - Max PSI 3000

Image Wash Products (Formerly Reflections Wash Products)