Vehicle Spray Wax Replacement (Foam-on/Rinse-Off Coating)

Traditional waxing is a lot of work. Our Image detailing wax makes things easier. There are many reasons for this transition. Mostly, it comes from the simplicity of the products, and how easy they are to use and how well they work. When using a spray foam wax replacement, you will see the simplicity (and effectiveness!) that it offers right away. It performs like a ceramic coating, giving you high gloss and long-term water repellence—without the hard buffing.

Reasons you'll love our Wax Replacement:

- Easy to use in the garage of your own home
- Continues to protect the surface of your vehicle forover 30 days
- Helps protect surfaces from contaminants (salt,dirt, etc) and UV rays
- Immediately enhances gloss and shine
- The most effective way to wax your big rig/farmequipment/RV/or other large equipment faster thanever before!
- Repels rain and ice, which can improve visibilitywhile on the road
- The #1 rated foam-on wax replacement - not someimitation snake oil
- Leaves behind streak-free water beads for that freshly detailed look
- Ideal for use on a wet car with microfiber towels to ensure a scratch-free finish
- Repels water, road grime, and oxidation with each application

While containers of Image wax replacement come complete with directions on the label (which you should read before using the product at home), the simple steps can be summed in here:

FOR FOAM CANNONS: Add 4-8oz of concentrate to your foam cannon and dilute the rest of the way with water.

FOR PUMP SPRAYERS: Add 4-8oz of concentrate per gallon of water

1. Wash and rinse the vehicle first. This is crucial, and should not be skipped. By washing the vehicle first, you prevent your foam-on wax from getting caught up in any dirt or grime and ensure a smooth, glossy finish. If unsure what type of car wash to use, consider a foam car wash.

2. While surfaces are still wet from the rinse water foam or simply spray the mixture evenly over the wet car using a foam gun or sprayer. It is important that your wax foam or wax foam replacement are evenly spread across the surface of the vehicle.

3. Rinse thoroughly. The job is not done until the foaming wax has been rinsed away entirely.

4. Squeegee, towel, or blow dry to remove water beads. Don't want to dry it? Do your final rinse with deionized water and then allow the vehicle to air dry spot free.

PRO-TIP: Using a leaf blower to dry is the most efficient and friction-free option for drying.

While those steps represent the long and short of the overall process, here are some key reminders:

**Do not allow the product to dry on surfaces before rinsing.

**If you do not follow the drying steps above and choose to allow hard water to dry on your surface, you will be left with hard water spots. These hard mineral spots come from your water, not the product. Always make sure to dry your vehicle.

**Discard diluted solution after 5 days.