icon Skip to content

Touchless 1 & 2 - The #1 Touchless Car Wash Soap for Cars & Trucks

Regular price $21.99

Shipping calculated at checkout

In stock

What To Expect From Any 2-Step Soap

Touchless/Brushless truck wash soaps, whether it's our product or a competitor’s, do not get your surface 100% clean. We tested several top competitor's 2-step touchless truck wash soaps alongside ours and determined both leave about 10% road film that you can only see up close when you run your finger through it. This is expected behavior for 2-step in general. This is because these types of touchless truck wash soap products are meant to be used for maintenance washes between your normal brush/mitt wash. They are not meant to completely replace washing with a brush/mitt. You can minimize the amount of road film left behind by making sure your surface is protected with some type of wax protection like our Wax Replacement.

Directions

Before you begin, there are a few factors to take into consideration. For instance, if this is your first touchless wash ever and it's been more than 7 days since your last wash, you will want to brush/mitt wash. After that first good brush/mitt wash, we strongly recommend using our foam-on Wax Replacement coating. These critical steps will help you achieve the best results with touchless washes going forward. 
1. (Optional Step) For extra cleaning power, pre-soak your surface with Bug Remover or Degreaser to help cut through extra road film.
2. Dilute in foam cannon - 1 part soap to 1 parts water (50% chemical | 50% water)
3. Apply touchless truck wash soaps from bottom up and allow each soap to dwell for at least 1 minute before the next step.
4. Foam Touchless 1 onto your surface
5. Foam Touchless 2 overtop of Touchless 1
6. High pressure rinse the entire surface, and make sure to keep the wand 6-12" away while maintaining a 90 degree contact angle with your surface
7. Rinse thoroughly making sure to overlap rinse patterns. It helps to go both left and right and up and down with your rinses for maximum coverage.

TIPS: Use a 40 degree (white colored) tip for rinsing. Use with water no hotter than 130 degrees so it does not break down chemical composition. Try to keep surfaces out of direct sunlight and cool before applying product. If sunlight is unavoidable work in small sections to ensure chemicals do not dry on surface. Adjust dilution knob on foam cannon to produce wet foam when working in dry/sunny conditions so appropriate dwell time can be reached before rinsing chemicals from the surface.

Our Recommended Weekly Wash Process

Detailed Wash - We use our full prep/wash/protect process once per week. Start with bug remover to pre-soak bug remains and heavy road grime. Then we foam on some Platinum Wash soap and scrub the surface clean. After scrubbing, rinse thoroughly. Once the surface is 100% cleaned, we apply a coating of Invisishield (our foam on wax replacement) & rinse off.

2-Step - Between detailed washes, we use Touchless 1 & 2 to neutralize road salt/grime and help keep the surface clean and free of extra build up.

Other Recommendations & Requirements

While this touchless truck wash soap approach is straightforward and will garner you preferable results, there are additional considerations to keep in mind when washing or rinsing your ride.
* Use a 40-65 degree tip for rinsing
* Use with water no hotter than 130 degrees (anything hotter will break down the touchless truck wash chemicals and make them less effective)
* A pressure washer is required
* Minimum recommended specs 2200 PSI & 3.5 GPM
* **IMPORTANT: If using a spigot to dispense Touchless 1, make sure it's plastic. Low pH solutions will slowly eat through soft metals over extended periods of time. This also includes metal components of foam cannon heads. To prolong the life of your foam cannons, we recommend running a small amount of Touchless 2 or other high pH solution through it to neutralize Touchless 1.

Cost Breakdown

In addition to personal habits and preferences, there are also costs to consider when it comes to the best touchless truck wash soap for you. So let’s take a look at the cost breakdown a bit:
* Touchless 1 & 2 gallons - $109.99  
* 1 gallon fills 12.5 foam cannons 
* 1 set of foam cannons = $8.80 to fill up 
* Passenger Vehicles: <1/4 Foam Cannons (<$2.20/wash)
* Daycab/Sleeper: 1/4 Foam Cannons ($2.20/wash)
* Truck & Trailer: About 1/2 foam cannons ($4.40/wash)
* Larger Equipment: Full Foam Cannons ($8.79/wash)
Plus all these savings...
* Saving time not waiting in line at truck wash 
* Saving time and money not going out of your way to a truck wash 
* Saving time not pulling out bucket and brush 
* Can wash a cab with a sleeper in 35 minutes.

Upgrade your truck washing game with our incredible collection of truck wash soaps! Get your hands on our best-selling product, the Touchless 1 & 2. Experience the ultimate touchless truck wash soap that guarantees zero harm to your expensive polished aluminum. The best foam car wash soap works on any vehicle! With its fast, easy, and effective touchless wash, you'll be amazed at how effortlessly you can wash your car or truck.  Now there’s no need to visit a questionable truck wash with mystery chemicals. Don't wait any longer! Shop our no touch car wash now and unleash the ultimate cleaning power for your vehicle!  

Check out our bundles to get started.  

Why You Need Touchless Car Wash Soap

Here are a few reasons why our customers love touchless car wash soap from Wash Product:

  • Takes less time than a commercial car wash
  • Requires less effort and elbow grease than a DIY car wash
  • Only specially formulated biodegradable organic acids, no “mystery chemicals”
  • Peace of mind knowing what you’re putting on your vehicle
  • It’s cost-effective – you don’t need very much to achieve incredible results 
  • Touchless wash is scratch-free and protects your paint job
  • No streaks, brightening, or whitening on your aluminum 
  • It’s frictionless  

What Makes Touchless Car Wash Soap "Touchless?"

No touch car wash soap uses high-pressure water and our specialized biodegradable, organic acid detergent. There are no sponges, brushes, or handwashing required. It’s a great option for anyone looking for a maintenance soap to use between regular washes.  

You’ll foam Touchless 1 onto your vehicle using a foam cannon, then layer Touchless 2 over the top. Rinse thoroughly and your car or truck will be road-ready and look like new. You can wash a cab with a sleeper in as little as 35 minutes! You’ll still need to wash your vehicle. However, this easy, cost-effective maintenance step is a great way to save time, money, and effort.  

 Shop Bundles 

Get VIP Deals!