Total Brite 1 is a professional‑strength, low pH vehicle pre‑soak and aluminum cleaner built for the toughest commercial cleaning environments. It attacks road film, oxidation, brake residue, and heavy soils on tractors, trailers, wheels, and non‑polished aluminum so your main wash step can work faster and more effectively. Packaged in a 55‑gallon drum or 275‑gallon tote, it’s ideal for high‑volume truck washes, fleets, and industrial wash bays that need consistent results shift after shift.
What Makes Total Brite 1 Different
Most “strong” pre‑soaks either barely move baked‑on grime or are so harsh that they’re difficult to control and risky around sensitive surfaces. Total Brite 1 is a concentrated low‑pH formula specifically tuned for commercial vehicles, giving you serious cleaning power on heavy soils while remaining predictable when applied at proper dilutions on non‑polished aluminum and wheels.
Used as a Step 1 chemical in multi‑stage wash processes, it penetrates and loosens the worst contamination so your Step 2 high‑pH soap can neutralize and carry it away. This chemistry‑first approach reduces repeat wash cycles and manual scrubbing, saving time and labor in busy tunnels, bays, and mobile rigs.
Recommended Use Routine
- Confirm you are working on cool surfaces and in appropriate conditions so the product will not dry on the vehicle.
- Set up Total Brite 1 in your tunnel, bay, or pressure‑wash rig at the recommended dilution for your pre‑soak, aluminum, or wheels application.
- Apply from the bottom up to tractors, trailers, wheels, and non‑polished aluminum surfaces, ensuring complete, even coverage.
- Allow a short dwell time so the low‑pH formula can penetrate brake dust, road grime, oxidation, and scale—do not let it dry.
- Follow immediately with a Step 2 high‑pH soap such as Total Brite 200 (Total Brite 2), applied directly over Total Brite 1 to neutralize and lift soils.
- Rinse thoroughly with high‑pressure water from top to bottom until all chemical and contamination are removed.
- Inspect heavily soiled areas and repeat the two‑step process only where needed to avoid over‑use of product.
Equipment & Setup Recommendations
Total Brite 1 is engineered for commercial and industrial wash environments where dedicated equipment and safety practices are already in place.
- Automatic tunnels and wash arches that meter low‑pH pre‑soak as a first stage.
- Fixed wash bays using proportioners or soap injector systems to pull from 55‑gallon drums or totes.
- Mobile fleet wash rigs configured for two‑step washing with separate acid and alkaline lines.
- High‑pressure wash systems capable of thorough rinsing on tractors, trailers, wheels, and equipment.
- Proper PPE (gloves, eye/face protection, and protective clothing) and chemical‑resistant pumps, lines, and fittings for handling low‑pH chemistry.
Why You Need Total Brite 1
- Delivers concentrated low‑pH cleaning power that penetrates and dissolves brake dust, road grime, oxidation, and heavy soils on commercial vehicles.
- Functions as a highly effective truck wash pre‑soak, dramatically improving the performance of your primary wash soap.
- Doubles as an aluminum and wheel cleaner at proper dilution, reducing the need for multiple separate products in your bay.
- Designed specifically for commercial and industrial use in tunnels, wash bays, and pressure‑wash rigs—not a repurposed consumer cleaner.
- Ideal as a Step 1 chemical in multi‑stage wash processes, pairing perfectly with Total Brite 200 (Total Brite 2) as the high‑pH follow‑up.
- Helps cut labor by loosening the toughest exterior contaminants before the primary wash, reducing brushing and re‑washing.
- Supplied in 55‑gallon drum and 275‑gallon tote options to match high‑volume fleet, truck wash, and service center demand.
- Backed by Image Wash Products’ commercial wash chemistry expertise, with clear handling and application guidelines to protect surfaces when used correctly.
Total Brite 1 at a glance
| Chemistry | Acid Step 1 presoak plus aluminum and wheel cleaner, pH below 1 (hydrofluoric acid) |
|---|---|
| Pair with | A high pH Step 2 such as Total Brite 2 or Total Brite 200 |
| Polish-safe | No. Non-polished aluminum and wheels only. |
| Soap injector setup | Pre-mix 50% Total Brite 1 / 50% water (1 part to 1 water) |
| Final strength at the injector | 41:1 |
| Shipping class | Ships as a DOT-regulated corrosive (UN 1790, Class 8, subsidiary 6.1) per SDS Section 14. |
| Safety Data Sheet | Download the Total Brite 1 SDS (PDF) |
Injector setup and strength come from our Soap System Calculator. Enter your pressure washer's PSI and GPM there to get the right metering tip.
Use it on
- Heavy road film, oxidation and brake residue on tractors, trailers and wheels
- Non-polished aluminum
Keep it off / avoid
- Polished aluminum and other polished finishes
- Glass and silicon-bearing surfaces (per SDS)
- Letting it dry on the surface
Total Brite 1 FAQs
Is Total Brite 1 polish-safe?
No. Use it on non-polished aluminum and wheels only.
What do I pair it with?
Apply Total Brite 2 or Total Brite 200 directly over it, then rinse thoroughly.
Does Total Brite 1 contain hydrofluoric acid?
Yes. Read the SDS and wear the required protective equipment.
How drum & tote freight works
- Ships by LTL truck freight from Michigan. 55 gallon drums and 275 gallon totes go out on a freight truck, not by parcel.
- Get a live estimate on this page. In the freight estimator, choose a commercial address with a dock or forklift, a residential address or no dock (liftgate needed), or pickup at your local freight terminal. Then enter your ZIP code and state.
- Your estimate is saved with your order. When you add to cart, the quote is added to your order notes. Estimates aren’t final, and final freight charges may vary.
- Hazmat status: Ships as a DOT-regulated corrosive (UN 1790, Class 8, subsidiary 6.1) per SDS Section 14.
- Order the right chemistry the first time. We don’t reimburse shipping costs on 5 gallon quantities and larger. If you’re not sure what fits your operation, call us at 616.777.7175 before you order.
- Outside the lower 48 states? Call us for a freight quote.

